Are you a do-it-yourselfer looking to pick up a hammer?
We put away our outdoor furniture when the temperature dipped into the single digits. And when we pulled them out, what a disappointment.
Not everyone is a pro furniture fixer, but you sure can be! And yet, we make the best of it with a quick furniture fix.
Here are the tricks you can use in repairing furniture. Continue reading!
1. Assess the Damage
Examine the furniture structure for weakened or loose boards or warped or cracked wooden joints. Check for any signs of water damage or rusting on metal components.
Inspect the surface for chips, cracks, and peeling paint or varnish. Take careful note of any damages, which will inform the restoration efforts.
For home repair and improvements, you may check these home additions for a comprehensive assessment.
2. Tighten Loose Screws
Loose screws can cause joints to be unstable or even break over time. Loose threads on screws can also cause them to pull out over time or make them difficult to unscrew.
Check the screws around the perimeter attached to the legs and drawer runners. Use a Phillips head screwdriver to tighten each screw, ensuring not to over-tighten them.
3. Repair Loose Joints
You can repair loose joints with wood glue and fasteners such as clamps, screws, or dowels. Make sure the joint is clean and tight, and you can use wood filler to fill old cracks or holes.
Assemble the furniture using clamps to hold the joint in place until the glue dries completely. You can also drill holes for screws or add dowels to strengthen the joint. Be sure to use wood glue specific to the wood used in your furniture repairs for the best and strongest restoration.
4. Fix Scratches and Dents
Use a razor blade to scrape away the old finish to repair deeper scratches. Once you have scraped away the finish, use sandpaper and wood filler to fill in the scratch.
To complete the repair, use a colored marker or stain and a clear finish coat. For deep scratches or dents, hire a furniture repair service to do a professional repair. It would help if you also avoided chemical refinishing, as it can damage the piece’s integrity.
5. Patch Upholstery Tears
Before you patch the tear, you must isolate the area with painter’s tape to protect the fabric. Fix the tear by cutting the upholstery fabric bigger than the hole.
Apply fabric glue to the underside of the patch and place it over the hole in the fabric. You must allow the glue to dry for 24 hours before you patch the tear.
6. Restore Worn Finishes
It is best to use a mild wood cleaner such as Murphy’s Oil Soap, ammonia, or a mixture of milk and vinegar to restore a worn finish. You should apply this using a soft cloth and rub on the finish.
It may need a light sanding to restore the furniture if the finish is too worn or there are intense scratches. Once you sand the wood, you should apply an appropriate oil-based finish.
A Guide to Furniture Fix
It is much easier and cheaper to fix furniture than to replace it. Following the hammer time DIY furniture fix will help ensure your job turns out and looks fabulous. So don’t replace your furniture; get hammerin’ and fix it yourself using our tips!
Would you like to read more articles like this? Then search the rest of our website now.